Noise and Vibration Control

Noise and Vibration Control

Noise and vibration control is an issue that is much more common than one might originally think. In fact, it can creep up in the most unlikely of places. A good case in point is animal lab environments. Indeed, ALN Magazine recently ran an article titled “Noise & Vibration Considerations for the Animal Lab Environment.” Therein, the publication pointed out, “In the lab animal facility setting, noise, sound, and vibration affect the life cycle, interaction, and behavior of animals.” However, because “the impact of noise, sound, and vibration is a largely undocumented factor in the research,” it’s an often overlooked issue.

“If the sound pressure levels get too high,” the article continues, “there is a negative impact on animals and structures.” Vibration control, however, is just as important to these animals as noise control in that it “is a driving force behind radiated sound.”

Obviously, exposure to noise and vibration can be detrimental to an animal’s hearing, but the risks don’t stop there. “Sound and vibration can [also] have a physical impact on animals.” Even more startling, “Smaller animals are more susceptible to the affects of sound and vibration over time and will adapt or adjust accordingly. In some cases, mutations may result from exposure to undesirable conditions.”

How can animal laboratories mitigate these problems? The magazine notes, “The designers can control items that are constant disturbances that may greatly impact the animal community. Items within the designer’s control include ventilation system design, machinery vibration isolation, wall construction, lighting selection, and computer terminal placement.”

During the design process, animal labs may want to consult with a producer of custom-molded rubber and rubber-to-metal bonded parts for noise and vibration control. A world leader in the creation of rubber molding and rubber-to-metal bonded parts can help to create an environment that is not only safe for the animals being kept there but is also conducive to a healthy work environment for the people who are employed there.

The Vibro-Insulator line of isolators and mounts, in particular, aid in the control of noise, vibration, and shock. Selecting the right type of mount for an individual animal lab’s specific applications can prove tricky, however. That’s why consultation with an expert with reputable qualifications in rubber molding and rubber-to-metal bonding can be very beneficial.

Of course, once professional advice has been obtained, browsing the Vibro-Insulator catalog allows animal labs easy navigation so they can select the correct mount for their application. Rubber Vibro-Insulators come in a variety of styles and sizes to handle most vibration isolation problems. Most of the mount styles are designed to be used in either the compression or shear direction.
Selection of the proper Vibro-Insulator for a specific application boils down to a multi-step mathematical function that an expert can calculate for the lab or into which the lab’s design team can plug the following information:

1. The maximum load that must be supported.
2. The number of mounts supporting the load.
3. The frequency of the disturbing vibration.
4. Any restrictions on the size or style of the mount based on space limitations or assembly considerations.

Carmen Fontana is a Web Services Manager for Western Reserve Internet Services. Karman Rubber is a world leader in vibration control.

China 2035 Bigger Than USA

Environmental Statements - How to Address Contaminated Land Issues

Environmental Statements - How to Address Contaminated Land Issues

Under the relevant European Directives, an Environmental Statement is the formal product of an Environmental Impact Assessment. Environmental Statements are often organised in a way that describes the environmental baseline, mitigation and effects for each type of environmental receptors: ecology, water resources, archaeological resources, human beings etcetera. Contaminated land is often managed in the same ways as the various environmental receptor groups, although it is principally a cause of impacts rather than a receptor. It also often refers to a pre-existing condition and its damaging effect is on a variety of different receptors such as human health, structures and buildings, surface water features, groundwater features and ecology. This often means that land contamination specialists struggle with integrating the issue in a logical manner in an Environmental Statement. Sticking to the structured approach of an environmental statement is essential to ensure a clear description of the existing environmental condition, the potential impacts and the actions taken to avoid, minimise, offset or manage the impacts. This article is based on UK practice and legislation, although fundamentally the issues should be similar within other contexts.

Contaminated land is in many countries considered on a source-pathway-receptor basis. This is important to understand the impact land development can have on the issue of contaminated land. Development can interfere with any of these three elements. It can introduce sensitive receptors by changing the use of land, for instance by building new residential units on a site that was previously used for heavy industry. New pathways linking pre-existing contamination with an existing receptor can be formed, for instance when piling through a non-permeable layer connecting a layer of contaminated soils with a deep aquifer. Finally by introducing pollutants on the site a development project can introduce a potential source of contamination.

The second element to consider is the structured approach of an environmental statement. Apart from the introductory and procedural elements described in the environmental statement, a good environmental statement comprised the following sections:

• environmental baseline conditions
• potential environmental impacts
• mitigating measures
• residual environmental impacts

There should be a logical relation between the different sections. Any receptor that is affected and described in the section about the potential impacts and effects should have been introduced in the section describing the baseline. Any material impact should be assigned a mitigation or management action etc. Implementing this structure allows a clear description and understanding of the environmental impacts and the way it will be managed.

Applying these principles to contaminated land will result in a baseline condition section that describes the current sensitive receptors that are present within the potential sphere of influence of the development, the sensitivity and importance of these receptors, the presence of any pre-existing contamination and the presence of actual and potential pathways. The next section, potential environmental impacts or effects, first considers the impacts that the development will have in terms of the introduction (or removal) of sensitive receptors and the creation of new pathways between existing and potential pollution sources and receptors. In addition this section will describe the potential environmental impacts that are associated with the introduction of new sources of contamination. In the third section, mitigating measures, a description of the actions to mitigate each of the impacts that may occur should be provided. Finally a statement of the residual impact of the development is provided in the last section: residual environmental impacts.

Paul Giesberg is an environmental consultant with a special interest in environmental impact assessment and sustainability in land use development.

Solar Power Is Cheaper Than Nuclear for the First Time | Inhabitat …

Energy from new solar installations has, for the first time, become cheaper than energy from new nuclear plants, according to a new Duke University study.

Panasonic Buying Out Solar Tech and Rechargeable Battery Makers

Panasonic announced today that it will buy out two of its subsidiaries, Sanyo and Panasonic Electric Works, for $9.4 billion. Sanyo is the largest lithium-ion rechargeable battery producer and 11th-largest solar cell producer in the …

a+t - Solar Decathlon 2010. Madrid

a+t is interested in this solar housing, not because of the type of housing in itself, clearly unsustainable from the urban point of view but for certain specific solutions which can contribute to the compact city and dense groups of …

A Metallic Solar Powered Cloud Museum for Xiamen China | Inhabitat …

Floating above the city of Xiamen, China like a cloud, this lofty museum takes art and culture to new heights.

Solar Sail Proves Photon Acceleration Works, as it Twists and …

Less than two months after being unfurled in space, Japan’s IKAROS solar sail accomplished its ambitious aimâ??becoming the first spacecraft to travel in space, powered by the sun. Now, it’s demonstrated its fine steering ability.

Noise and Vibration Control

Noise and Vibration Control

Noise and vibration control is an issue that is much more common than one might originally think. In fact, it can creep up in the most unlikely of places. A good case in point is animal lab environments. Indeed, ALN Magazine recently ran an article titled “Noise & Vibration Considerations for the Animal Lab Environment.” Therein, the publication pointed out, “In the lab animal facility setting, noise, sound, and vibration affect the life cycle, interaction, and behavior of animals.” However, because “the impact of noise, sound, and vibration is a largely undocumented factor in the research,” it’s an often overlooked issue.

“If the sound pressure levels get too high,” the article continues, “there is a negative impact on animals and structures.” Vibration control, however, is just as important to these animals as noise control in that it “is a driving force behind radiated sound.”

Obviously, exposure to noise and vibration can be detrimental to an animal’s hearing, but the risks don’t stop there. “Sound and vibration can [also] have a physical impact on animals.” Even more startling, “Smaller animals are more susceptible to the affects of sound and vibration over time and will adapt or adjust accordingly. In some cases, mutations may result from exposure to undesirable conditions.”

How can animal laboratories mitigate these problems? The magazine notes, “The designers can control items that are constant disturbances that may greatly impact the animal community. Items within the designer’s control include ventilation system design, machinery vibration isolation, wall construction, lighting selection, and computer terminal placement.”

During the design process, animal labs may want to consult with a producer of custom-molded rubber and rubber-to-metal bonded parts for noise and vibration control. A world leader in the creation of rubber molding and rubber-to-metal bonded parts can help to create an environment that is not only safe for the animals being kept there but is also conducive to a healthy work environment for the people who are employed there.

The Vibro-Insulator line of isolators and mounts, in particular, aid in the control of noise, vibration, and shock. Selecting the right type of mount for an individual animal lab’s specific applications can prove tricky, however. That’s why consultation with an expert with reputable qualifications in rubber molding and rubber-to-metal bonding can be very beneficial.

Of course, once professional advice has been obtained, browsing the Vibro-Insulator catalog allows animal labs easy navigation so they can select the correct mount for their application. Rubber Vibro-Insulators come in a variety of styles and sizes to handle most vibration isolation problems. Most of the mount styles are designed to be used in either the compression or shear direction.
Selection of the proper Vibro-Insulator for a specific application boils down to a multi-step mathematical function that an expert can calculate for the lab or into which the lab’s design team can plug the following information:

1. The maximum load that must be supported.
2. The number of mounts supporting the load.
3. The frequency of the disturbing vibration.
4. Any restrictions on the size or style of the mount based on space limitations or assembly considerations.

Carmen Fontana is a Web Services Manager for Western Reserve Internet Services. Karman Rubber is a world leader in vibration control.

Electric car’s Technology

TheGrahamBaileyShow Episode 3 in Going Green

TheGrahamBaileyShow Episode 3 in Going Green

Green Tip - Reuse It

It is good practice to reuse as much as you can. It will prevent waste and for plastic items help keep them out of dumps!

Items you can Reuse at least once:

* water bottles. as long as you keep them clean, you can reuse them several times. It will save you money just to refill the bottle with tap. refrigerate it and you are good to go.

* newspaper. you can use old newspapers to clean your windows and mirrors, as shelf liners and more. reusing newspapers can really help save on paper purchases, thus saving trees!

* donate or free-cycle. items like clothes, toys, books…almost anything can be donated or given away instead of tossed. just make sure it is clean and in decent condition.

* make compost. use your unused natural food items to make compost.

* batteries. stop buying one time use batteries and only purchase rechargeable ones.

* refillable. buy condiments, shampoos and the like in large containers and refill smaller user-friendly container for it. This will help you buy less bottles and use less plastic!

* bags. stop using paper and plastic bags. buy canvas bags and reuse them over and over again.

* paper. any time your printer messes up or you make an error when using paper, let your kids use it to color on. or, you can use it as scrap.

* clothing. use old socks, t-shits and cloth materials as rags, to clean the car or to dust with.

* egg cartons. these can be reused for arts and crafts, paint holders, taco items, or even to organize jewelry or small items.

* plastic milk jugs. these can be used for pots for plants or even to water them.

* cardboard boxes. go to a fun place with your kids that has a hill and have a summer sledding competition! cut large squares and use the cardboard as your “sleigh.”

As you can see, there are many many ways that you can reuse items you use everyday. Be creative and brainstorm about how you can make the most of everything and be a good steward to God’s planet!

Copyright © Green Christian Network, All Rights Reserved

About the Author: Cindy Taylor is a Christian stay at home Mom who love the Lord and cares about God’s planet. You can see her passion and writing at her website, Green Christian Network (http://greenchristiannetwork.com).

Green Transportation - No Bailouts Necessary

Green Transportation - No Bailouts Necessary

Unless you have been trapped in a cave for the last seven months you are well aware of the disaster overtaking the American automobile industry. Our government is using billions of taxpayer’s dollars to prop up an industry that has been one of the leading facilitators of numerous ills in our society, which will also take billions of dollars to repair, if it is even possible to do so. 

Air pollution which contributes to increased medical costs, urban sprawl, a negative balance of payments from importing oil and global warming can all be traced at least in part to our addiction to the automobile. Now that I’ve ranted about the autos effect upon our society I also greatly acknowledge that we all, myself included, greatly enjoy the mobility and freedom provided by the pernicious machine. We can’t live with ‘em and we can’t live without ‘em. What are we to do?

A lot has been written about the currently nonexistent plug-in electric car. This machine when it finally hits the market could help solve some of our problems but current pricing estimates place the car in the forty thousand dollar range. I’m sure of one thing, it won’t solve many problems if you don’t sell them and at that price I’d hedge my bets.

However, there is one personal transportation option on the market that fits into all of President Obama’s initiatives for energy self sufficiency, global warming (reduction of green house gases), health care (exercise and weight loss), environmental protection (reduction of air and water pollution), and infrastructure renewal.   That option is the Electric Bicycle.

The electric bike using lithium batteries (traditional lead-acid is very environmentally harmful) can go, depending on load factors and riding habits, roughly twenty miles at twenty miles an hour on one charge. It is almost completely silent, gives off no emissions, does not use foreign oil, does not require much room to operate or park, never needs a tune up and provides exercise. It eliminates many of the drawbacks of riding a traditional bicycle for basic transportation while having few of its own. I recognize that not many of us are hardy enough to ride a bike in the rain, snow or freezing cold but that applies as well to motorcycles, motor scooters and traditional bicycles. The electric bike can get you farther, faster without arriving at your destination soaked in sweat. It can operate in many places where other motorized vehicles cannot and makes taking hills a cinch. Riding five or ten miles to work is no big deal and you can simply pedal around bottled up traffic. Usually the lightweight batteries easily detach from the bike and can be carried into your place of work or school for recharging.

Some electric bicycles offer high tech extras such as LiFePO4 batteries that are good for a thousand recharges, regenerative braking that helps recharge the battery much as a Prius does, and internal gearing to generate more torque for uphill climbs. Most electric bikes use what is referred to as a hub motor. This is not a traditional gear or belt-drive motor but is built directly into the hub of one of the wheels. This motor contains two internal rings of opposing magnets that when power is applied causes the wheel to spin. Such motors need little service and never require oil changes, spark plugs or new belts.

Electric bikes come in several of styles. There are the traditional “beach cruiser” and mountain bike styles as well as electric folding bikes, tricycles and “road bikes”.   The electric folding bikes are particularly interesting. Smaller and lighter than a traditional bicycle, they easily fold up and fit into a car trunk and can be carried on a commuter or subway train with little effort. You can take the train to your stop, unfold the bike and pedal on your way. They are also useful for those who live in tight quarters and have no external place to store their ride.

For those of you that are moderately handy with tools, there are a number of electric bike kits on the market that allow you to adapt an ordinary bicycle into an electric bike. One company, Worldwide Electric Bikes, has a particularly well-designed kit that has many of the features I previously mentioned. These electric bike kits do not require a high level of mechanical ability to install. A few common hand tools, a basic understanding of how things go together and the ability to read directions is all that is required. However, if you don’t know the difference between a crescent and a hex wrench, you may wish to buy a pre-made bike or have someone install the kit for you. If you do choose to go the kit route, you can end up with a much more powerful and sophisticated bike for substantially less money than a factory built electric bike. 

Electric Bicycles in all forms have long been a staple of personal transportation in Europe and Asia where there are hundreds of thousands in operation. In the United States bicycles have traditionally been dominated by the toy or recreation market or for the dedicated enthusiast. In both Europe and Asia, cycling has been a traditional means of basic transportation. I believe that this is going to be more and more the case in this country. People are avidly seeking relief from the high financial and societal cost of automobiles. The electric bicycle, while not a panacea, is definitely poised to help provide a portion of that relief.

Electric Bicycles are inexpensive to purchase, require no license or insurance, have a negligible cost of operation and are totally “green”. So, what’s not to like?

http://www.worldwideelectricbikes.com

Blogging Sustainability Pt.1

Go Green With Natural Finishes

Go Green With Natural Finishes

Finishes are coatings that are  applied to the external and inside surfaces of walls to protect them from the elements and from wear and tear.  They also improve the appearance of the structure and are used to enhance the design of rooms.

Petroleum, our main source of oil-based wood finishes and paint, is a non-renewable resource.  There are now paints and finishes on the market that are derived from a renewable resource, which  in a small way, helps to reduce dependence on oil, and  contributes to a more sustainable world.

The basis for these products is whey, which is a product of cheese making, and which has a high biochemical oxygen demand (BOD).  This increases the burden on waste treatment facilities, and can also pollute our natural water sources.  In the last ten years, this by-product has been used for many new purposes, one of which is natural wood finishes.

When choosing paints for your decorating, use the low or no VOC (volatile organic compound) paints. For hundreds, no, thousands of years, earth, clay and lime have been used, both in hot and cold areas of the world.  And now this knowledge is being readapted for contemporary use. If you do any redecorating or new building, it makes sense to contribute to having green, healthy surroundings.

Low and no VOC paints have less smell and less impact on air quality.  EPA studies have shown that indoor air quality is up to five times more toxic than outdoors, mainly because of toxic emissions from paint and finishes. This particularly affects anyone with allergies, asthma, or chemical sensitivities. With the new “green” paints, there will be lower contamination of landfills, groundwater, and the ozone.

Switching will not cost you more.  Cleanup is easily done with soap and water, instead of toxic chemicals, and brushes can easily be cleaned and reused.  The paint is still washable, and is far less harmful to you, your pets, and the environment.

Lisa is a freelance writer with a specialty in Internet content and SEO articles. She has written thousands of articles, hundreds of ebooks and thousands of website pages and related content. She has also authored her own books and works as a consultant to other writers, Internet marketers and Internet businesses.

Professional wordsmith for hire: gamer, wife, mother, entrepreneur, published poet, co-owner of game guides company (http://www.liti4.com), public speaker and Internet business consultant. You can learn more or follow Lisa’s blog from her website: http://www.freelancewriter4hire.com

Solar Building Blocks

Fluoro-Solar Collectors

Fluoro-Solar Collectors

Eco-Friendly - Some Green Thoughts

How often when you go to the grocery store are you asked if you want paper or plastic grocery bags?  Well the best answer to that would be NEITHER.  To keep the U.S. stocked with paper and plastic grocery bags, takes about fourteen million trees and twelve million barrels of oil every year! Investing in a few reusable bags makes a lot of sense.

Think about those little paper receipts you get at the gas pump and the ATM machine.  If all people would simply note it in their checkbook, or in a small notebook when they made a purchase or withdrew money, it would be saving enough paper to encircle the globe fifteen times!

If every American would by one roll of recycled paper towels instead of the others, it would save over half a million trees. And how about turning the car off when you are waiting for someone, in the drive-thru lane  or stuck in a huge traffic jam?  When a car idles for more than a minute it is polluting the air and wasting your gas.

Cordless phones are replacing conventional phones.  But think about it… sitting in a recharging cradle and using up your electricity  twenty-four hours a day and every day of the week! Replace one or two cordless phones with your old conventional ones and you’ll save energy.  The old fashioned ones use only a tiny bit of electricity, and will work when the power is off. If you insist on the convenience of cordless phones, make sure the ones  you do get are Energy Star-rated, for high energy efficiency.

Lisa is a freelance writer with a specialty in Internet content and SEO articles. She has written thousands of articles, hundreds of ebooks and thousands of website pages and related content. She has also authored her own books and works as a consultant to other writers, Internet marketers and Internet businesses. Professional wordsmith for hire: gamer, wife, mother, entrepreneur, published poet, co-owner of game guides company (http://www.liti4.com), public speaker and Internet business consultant. You can learn more or follow Lisa’s blog from her website: http://www.freelancewriter4hire.com

Global Warming - Are We to Blame?

Global Warming - Are We to Blame?

Global warming is one of those topics that I still find myself wondering what to truly believe. Is our CO2 production really the culprit in the warming of the planet? Or are there some other larger influences at play here. I have a hard time believing mankind’s activities are solely to blame for any kind of climate change.

After all, CO2 is only one of many greenhouse gases that can affect the warming trend. Water vapor is by far the most abundant and effective at influencing the greenhouse problem. But I don’t see any kind of public concern over evaporation of water in any way at all. Okay, I realize that there is little or even nothing that can be done about that but the point is CO2 is just a tiny fraction of the greenhouse gases affecting our climate. So if water vapor is by far the largest greenhouse gas then why are we so obsessed by manmade CO2? Mankind’s ego.

We see a small trend in the planets temperature rising and of course we assume it must be what we are doing. I am truly pleased to see that we are taking an interest in reducing pollution from cars and industry but I really have my doubts about the connection to global warming at least in the significant way the media would like us to believe.

The media is sounding the alarm bell which of course sells more newspapers than reporting the less extreme predictions surrounding the warming trend. The weather models produced by scientists predict a reduction in the temperature differences between the poles and the equatorial regions. This will in fact reduce the number of violent tropical storms, as there will be less of a temperature discrepancy to stimulate them. Also the warming of the regions closer to the poles will allow agricultural pursuits in areas where it was not possible before. Food production would be able to rise accordingly. The alarmist media isn’t interested in those types of stories it seems.

The change in the world’s temperature is just that, change. There is irrefutable evidence that the temperature of the planet has and most likely will always be changing regardless of what we are doing. What are we so afraid of? Do the alarmists doubt mankind’s ability to adapt and cope with a few degrees of temperature change or even sea levels rising a meter or so? There will doubtless be hardships and even some displaced people in some regions but man has the ability to adapt and change. We have demonstrated this through the ages. I am confident that we will not only survive these changes but also learn to use them to our advantage.

I live in Canada and if you ask anyone living north of the temperate zone about rising temperatures the resounding response would be “bring it on, we could use a little global warming around here”. Life will improve greatly for huge numbers of the world’s population with a couple of degrees increase in the planet’s temperature. Migration to areas that were before considered uninhabitable by most will have a more moderate climate allowing for farming and other activities. You can’t sell newspapers with stories like that.

The scientific data indicates that 1998 was the warmest year on record. The planet has been cooling ever since. A quote from Dr. Oleg Sorokhtin of the Russian Academy of Natural Sciences “The earth is at the peak of one of its passing warm spells, It’ll start getting cold by 2012, and really, really cold around 2041″. So who are we to believe? A respected scientist or Al Gore who has made millions from his crusade for the planet and his questionable agenda and phony pseudo science.

If the planet is warming I can honestly say I hope so. We will get by and probably do well in the process. What really concerns me is the muzzling of real science in the debate. An objective media would go a long way in helping us all deal with the facts as they truly are. Focusing on the alarmist perspective only causes undue fear where none is warranted.

Is driving our SUV’s and minivans really the problem here? Or is our planet just going through another climate cycle like it has done so many times before? The only thing I know for sure is I can’t count on the media to provide the answers.

I recently produced the feature film The Harvest Project. Find out more and view the trailer at http://www.theharvestprojectmovie.com The movie is also available for sale at http://www.filmannex.com/search/searchkey/harvest%20project You can contact me at doug_king@shaw.ca

Article Source: http://EzineArticles.com/?expert=Doug_G_King

Detroit Auto Show, WTOL News

USA - China - A G2 For Climate and Economy?

USA - China - A G2 For Climate and Economy?

China appears to view global warming as an economic issue, Obama’s administration is primarily focused on the current economic crisis as well, but climate change is also a serious crisis and a threat to the world’s economic system itself with all its present and predicted impacts. Don’t these global problems require an integrated economic and environmental strategy? The hypothesized summit between Barack Obama and the Chinese president, Hu Jintao, could be an important step to accelerate urgent actions needed both to face the global economic downturn and to build a solid climate pact.

China, in its last 5-year plan, sets targets to reduce national energy intensity (energy used per unit of GDP) by 20% between 2006 and the end of 2010. According to Deborah Seligsohn, China Program Director on Climate, Energy and Pollution of the World Resources Institute, this target seems to be realizable given their latest remarkable record (-1.8% in 2006, -3.7% in 2007, and -4.2% in 2008.) Last month Hillary Clinton met experts from the Asia Society and the Pew Centre for Climate Change that together wrote a report that could help the creation of this US-Chinese partnership on climate change. But the good examples from China, although not directly referred to CO2 emissions, and Obama’s ambitious plan on energy and climate will need decisions from other 13 countries (or federations such as the EU), including Russia, India, Japan to get 80% of world’s emissions “under control”. Nowadays the other 173 countries account for about 20% of total CO2 emissions, but population increase and old development patterns could dangerously increase their “pollution share” in the future: every nation will be then required to cut the CO2, but large amount of money are needed to do so. Where will our leaders take Dollars, Yuan or Euros these days?

Next steps: -264 days to COP15:
Two events along the path to Copenhagen will take place in Bonn from March 29th to April 8th: the 7th session of the AWG-KP (Ad Hoc Working Group on Further Commitments for Annex 1Parties under the Kyoto Protocol) and 5th session of the AWG-LCA (Ad Hoc Working Group on Long-term Cooperative Action under the Convention). As we can read on the UNFCCC website “this is the first of three planned negotiating sessions before COP 15 in December” and can hopefully prepare a good ground for delegations and political leaders to decide upon.

Written by Luca Marazzi on behalf of Responding to Climate Change.

For further information on Climate Change please visit the Responding to Climate Change website - http://www.rtcc.org

Article Source: http://EzineArticles.com/?expert=Luca_Marazzi

Portland, The Emerging Solar Hub? | Triple Pundit: People, Planet …

Mention solar, and advocates of this renewable energy source salivate at the thought of solar panel farms spreading across California’s Central Valley, farther south in the Mojave, and in wide open spaces in Arizona, New Mexico, …

Impossible Sounding Solar Plant Generates Electricity at Night

Skeptics of modern technology, behold: a newly opened solar plant in Sicily is able to continue generating electricity long after the sun goes down. The trick lies in the plant’s use of salt to store up heat for later use.

China's Influence on Solar Energy

(March 3, 2010) Reyad Fezzani, CEO of BP Solar, discusses recent technological and business advances made by Chinese engineers and companies in relation to.

Space Music Vol. 12: Solar Music Explained â?? The Blogs at …

HowStuffWorks.com writer Robert Lamb talks to NASA solar astrophysicist C. Alex Young about solar music.

Intel's Biggest Solar Site to Generate 1.5 MW Annually …

Intel’s solar installations in Folsom, Calif., and Chandler, Ariz., part of the semiconductor manufacturer’s plan to build several solar projects in Arizona, California, New Mexico and Oregon, are now up and running.

Green Cab VT News Report

Green Cab VT News Report

Journalism For Development

The impression created by the media over years has been held with mixed feelings. Whereas some media corporate world are known to have positively helped transform societies politically, economically, culturally and technologically; some other have only torn the world apart through negative reporting that supports aggressive confrontation, glorifying terror activities to make eye-catching headlines with selfishly money motive.

Similarly, the aggressive, corrupt and oppressive groups and individuals (religiously, politically or economically) have been glorified in the way that sustains situation that steadily extinct some societies.

Their content hardly provided or suggested solutions to alarm-triggering headlines. And much of the media activities have lacked an element of social responsibility that is tangible to give a voice to the voiceless and direct transformative opportunities to the poor, disabled and other disadvantaged groups

Journaling is a key communication tool. All organisms by nature communicate either verbally or non-verbally, yet attempting to make sense of whatever cues that are exchanged or evaluated.

True, we tend to be evaluative of one another whilst trying to figure out what intentions the other party could have towards you. The aim can be to help measure up the relationship that possibly could be developed, whether health or not.

Of course, in certain encounters some people could be threatened, suspicious, lack confidence, defensively withdraw or get on well in a healthy and rewarding relationship. This, indeed, is how communities can influence attitudes and behavior towards one another. That way, we could manage, control and direct directs and behavior. What a powerful tool a pen can be!

But success through journaling it self needs a period of training and practical experience, such that we can communicate to effectively make or unmake relationships or evolve life through the aspects of observing, reading and listening to words and actions of others and things.

The primary motivators to writing is the element of having an opinion yet unique. As part of research steps, one would be required to publish a final report or summarized article from the investigations, results and analyses carried out. Other researchers or students would want to review literature about statements pending investigation. From their successes, investigators either get awards or promotion.

Through practical experience, some people make careers out of their abilities and skills to communicate effectively as writers, as advertising agents, as interpreters and, as counselors or therapists.

Secondary employment too could be provided by journalism like driving, distribution, sale or retailing, legal advising et cetera. Eventually, those associated to it could become social icons or global media giants.

On the other hand, journaling could have important health benefits as stress reliever. By writing about one’s traumatic experience, sufferer could drop so much mental toxins off him or her.

And, at the same time it would help improve on analytical and problem-solving skills crucial in successful dealing with the ever emerging challenges encountered in day-to-day life.

From the natural or ecological sense, journaling or communication significantly help to connect different elements of the eco-system -through the principles of interconnectivity and interdependence.

And through media, we can help improve the dangerous global situations as nuclear conflicts, to make the world a better place for everyone to live in. But this would only be so if we formed a common objective in solidarity to it (non-violence) under the principle of conscious non-violence through tolerance and respect for divergent views.